en:arduino_module
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
en:arduino_module [2018/10/11 16:26] golikov created |
en:arduino_module [2020/03/25 16:28] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== Arduino-Based Payload ====== | ||
| + | |||
| {{ ru:arduino_shield_1.png?direct&300| Arduino shield}} | {{ ru:arduino_shield_1.png?direct&300| Arduino shield}} | ||
| - | The spacecraft contains in its composition the equipment, which ensures the performance of its main task. This equipment is called the payload. | ||
| - | In the basic part of the designer Orbikraft there is one payload - the camera. To create your own payloads, you can use the Arduino hardware and software platform. | + | The orbiter contains a mission-specific equipment that supports its main objective. This equipment, knows as payload, is what the orbiter was designed to carry in the first place. |
| + | |||
| + | The basic version of the Orbicraft construction set contains one type of payload – the still-image camera. Users can design their own payloads using the Arduino breadboard platform and software. | ||
| - | Information exchange between the Arduino microcontroller and the on-board computer takes place with the help of an expansion card (so-called [[http://orbicraft.sputnix.ru/lib/exe/fetch.php?media=ru:arduino_shield_1.png|shield]]), which is installed on the board with a microcontroller. The expansion board contains a connector for connecting to the cable network by means of a standard designer cable. Various peripherals can be connected to this board [[https://create.arduino.cc/projecthub?by=part&category=flying-things&difficulty=&part_id=10116&sort=popular&type=|various projects]] based on Arduino. In our lessons we will show what projects can be implemented for the payload of the spacecraft. | + | Data communications between the Arduino microcontroller and the orbiter computer take place using an extension board (a so-called shield) that mates with the microcontroller mainboard. The extension board contains a connector for interfacing with the cable network using a standard ribbon cable from the construction set. Various peripherals used in a variety of Arduino-based projects can be connected to this board. In our lessons we will show which projects can be implemented for the spacecraft payload. |
| - | As the Arduino board is used [[https://store.arduino.cc/usa/arduino-mega-2560-rev3|Arduino Mega 2560]]. | + | [[https://store.arduino.cc/usa/arduino-mega-2560-rev3|Arduino Mega 2560]] will be used for the Arduino board. |
en/arduino_module.txt · Last modified: 2020/03/25 16:28 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
