User Tools

Site Tools


en:arduino_module

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:arduino_module [2018/10/11 16:26]
golikov created
en:arduino_module [2020/03/25 16:28] (current)
Line 1: Line 1:
 +====== Arduino-Based Payload ======
 +
 {{ ru:​arduino_shield_1.png?​direct&​300| Arduino shield}} {{ ru:​arduino_shield_1.png?​direct&​300| Arduino shield}}
-The spacecraft contains in its composition the equipment, which ensures the performance of its main task. This equipment is called the payload. 
  
-In the basic part of the designer Orbikraft there is one payload ​the camera. ​To create your own payloads, you can use the Arduino ​hardware ​and software ​platform.+The orbiter contains a mission-specific equipment that supports its main objective. This equipment, knows as payload, is what the orbiter was designed to carry in the first place. 
 + 
 +The basic version ​of the Orbicraft construction set contains ​one type of payload ​– the still-image ​camera. ​Users can design their own payloads ​using the Arduino ​breadboard platform ​and software.
  
-Information exchange ​between the Arduino microcontroller and the on-board ​computer ​takes place with the help of an expansion card (so-called ​[[http://​orbicraft.sputnix.ru/​lib/​exe/​fetch.php?​media=ru:​arduino_shield_1.png|shield]]), which is installed on the board with a microcontroller. The expansion ​board contains a connector for connecting to the cable network ​by means of a standard ​designer ​cable. Various peripherals can be connected to this board [[https://​create.arduino.cc/​projecthub?​by=part&​category=flying-things&​difficulty=&​part_id=10116&​sort=popular&​type=|various projects]] based on Arduino. In our lessons we will show what projects can be implemented for the payload ​of the spacecraft.+Data communications ​between the Arduino microcontroller and the orbiter ​computer ​take place using an extension board (so-called shield) ​that mates with the microcontroller ​mainboard. The extension ​board contains a connector for interfacing with the cable network ​using a standard ​ribbon ​cable from the construction set. Various peripherals ​used in a variety of Arduino-based projects ​can be connected to this board. In our lessons we will show which projects can be implemented for the spacecraft ​payload.
  
-As the Arduino board is used [[https://​store.arduino.cc/​usa/​arduino-mega-2560-rev3|Arduino Mega 2560]].+[[https://​store.arduino.cc/​usa/​arduino-mega-2560-rev3|Arduino Mega 2560]] ​will be used for the Arduino board.
  
  
en/arduino_module.1539264415.txt.gz · Last modified: 2020/03/25 16:29 (external edit)