User Tools

Site Tools


en:assembly

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:assembly [2018/01/16 18:22]
ashley
en:assembly [2018/01/16 18:44] (current)
ashley
Line 7: Line 7:
 // //
  
-The central cube consists of four side panels, a bottom panel, and a cover panel. ​Side panels have ledges, ​bottom and cover panels have corresponding mortises to arrange the panels relative to each other. The final positioning is carried out with help of corner blocks.+The central cube consists of four side panels, a bottom panel, and a cover panel. ​The side panels have projections and the bottom and cover panels have corresponding mortises to arrange the panels relative to each other. The final positioning is carried out with help of corner blocks.
  
-On each panel there is a grid of screwed ​holes in 20 mm increments to attach modules to the central cube. The order of assembly, ​cabling ​and internal or external ​composition ​varies ​from the assigned task and is chosen by user.+On each panelthere is a grid of holes in 20 mm increments ​that are used to attach modules to the central cube. The order of assembly, ​layout of the cable network, ​and the internal or external ​arrangement ​varies ​based on the assigned task and is chosen by user.
en/assembly.txt · Last modified: 2018/01/16 18:44 by ashley