What is Orbicraft for?
How to work with it
Orbicraft Subsystems
Arduino-Based payload
Lessons
Laboratory equipment
Feedback
News
What is Orbicraft for?
How to work with it
Orbicraft Subsystems
Arduino-Based payload
Lessons
Laboratory equipment
Feedback
News
This is an old revision of the document!
This page is not fully translated, yet. Please help completing the translation.
(remove this paragraph once the translation is finished)
Taking a picture from the camera
Taking a snapshot from the camera requires working with the MCC program from the Software section and performing some sequence of actions described below.
Screenshots and the described path in the instructions are presented for Windows 7. In Windows 8 and 10, the names of the tabs may differ.
You can read about how to assemble a train Cable network.
Windows Firewall can block the transfer of images over the Wi-Fi channel, so you need to disable it.
You can read about how to create and run a program in the section Lesson_01
The test program, which is presented in section Камера ДЗЗ, take ten snapshots in a row and transfer them to the user's computer. In this program ЦУП (Ground Control.exe), launched on the user's computer, the received data will be displayed in the area to the right of the map in place of the SPUTNIX company logo.