en:camera_subsys
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision Next revision Both sides next revision | ||
|
en:camera_subsys [2017/11/21 22:55] writer created |
en:camera_subsys [2019/09/16 15:40] golikov |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| Virtual [[power_subsys|consumption]] - 200 mA | Virtual [[power_subsys|consumption]] - 200 mA | ||
| - | {{ ru:camera.jpg?direct&200|}} | + | {{ :ru:камера.png?direct&200| Камера}} |
| - | The camera is a useful load for surveying the Earth from space, for which in our case the spacecraft was designed. In reality in addition to cameras for surveying the Earth there is a huge range of various payloads for space vehicles - scientific, educational, military and technological. | + | The camera is a useful payload for surveying the Earth from space, for which the spacecraft was designed in our case. In reality, in addition to cameras for surveying the Earth, there is a huge range of possible payloads for space vehicles - scientific, educational, military and technological. |
| - | In experiments with the construction set, the camera will be a useful load of spacecraft and the transfer of high-quality photographs of a given "Earth" surface segment - the target task of the "launch." The camera has 10 memory sectors for taken photos, which are filled in with the function: | + | In experiments with the construction set, the camera will be a useful payload as it will transfer high-quality photographs of a given "Earth" surface segment - the target task of the "launch." The camera has 10 memory sectors for photos taken, which are filled using the following function: |
| int32_t take_photo(uint16_t num) | int32_t take_photo(uint16_t num) | ||
| - | After filling in the sector the photo remains in it until it is overwritten with the new photo. Also at any time, photo can be transmitted to Earth via a high-speed radio channel using the function | + | After filling in a memory sector, the photo remains there until it is overwritten with a new photo. Also, at any time, photos can be transmitted to Earth via a high-speed radio channel using the following function: |
| - | int32_t transmit_photo(uint16_t num) //Изменено в версии 1.0 | + | int32_t transmit_photo(uint16_t num) //Changed in version 1.0 |
| **Important notes** \\ | **Important notes** \\ | ||
| - | The camera loop should be as short as possible (no longer than 40cm), there should not be pieces of unused loop after installing the connectors. | + | The camera cable should be as short as possible (no longer than 40cm). There should not be pieces of unused cable after installing the connectors. |
| - | You can connect the camera only directly to the camera connector on the central computer. | + | You can connect the camera directly to the camera connector only on the central computer. |
en/camera_subsys.txt · Last modified: 2020/03/25 16:28 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
