User Tools

Site Tools


en:pc_subsys

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:pc_subsys [2018/01/22 16:41]
ashley
en:pc_subsys [2019/09/16 15:34]
golikov
Line 2: Line 2:
 Virtual [[power_subsys|consumption]] - 150mA Virtual [[power_subsys|consumption]] - 150mA
  
-{{ ru::pc.jpg?​direct&​200|}} +{{ :ru:бку.png?​direct&​200| ​БКУ ​}}
-The satellite on-board central computer (OBC) contains and executes user programs of microsatellite mission. It is the software running on it that decides in what order to receive data from which sensors, how to interpret it, what control commands to give, when to turn on and off the payload (take a picture), when and what information to transfer to the "​Earth"​. It should be noted that in real life the central computer should not be disconnected from the PSS programmatically,​ since without BCC the spacecraft will be lost in space. In our construction set it can not be done in the normal mode of operation.+
  
-To download the user program code to the on-board central computer, ​you need to use the [[debug_interface|web interface]]+The satellite ​on-board central computer ​(OBC) contains and executes user programs of the microsatellite mission. It is the software running on it that decides in what order to receive data from which sensorshow to interpret the data, what control commands to give, when to turn the payload on and off (take a picture), and when and what information to transfer to the "​Earth"​. It should be noted that in real life the central computer should not be disconnected from the PSS programmatically,​ since without OBC the spacecraft will be lost in space. In our construction set, this cannot be done in the normal mode of operation.
  
-This computer ​already has a special software [[libschsat|library]] for working with peripheral devices of the "​satellite"​ via the RS485 bus.+To download the user program code onto the on-board central ​computer, you need to use the [[debug_interface|web interface]]. 
 + 
 +There is a special software [[libschsat|library]] for working with peripheral devices of the "​satellite"​ via the RS485 bus already installed on the on-board central computer
en/pc_subsys.txt · Last modified: 2019/09/16 15:34 by golikov