User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:pc_subsys [2019/09/16 15:34]
en:pc_subsys [2020/03/25 16:28] (current)
Line 1: Line 1:
-**On-board central computer** \\  +====== Orbiter Computer ====== 
-Virtual ​[[power_subsys|consumption]] - 150mA+==== Orbiter Control Computer ==== 
 +Virtual ​power draw: 150 mA
 {{ :​ru:​бку.png?​direct&​200| БКУ }} {{ :​ru:​бку.png?​direct&​200| БКУ }}
-The satellite on-board central computer ​(OBCcontains ​and executes user programs ​of the microsatellite ​mission. It is the software running ​on it that decides in what order to receive data from which sensors, how to interpret the datawhat control commands to give, when to turn the payload ​on and off (take picture)and when and what information ​to transfer to the "Earth". It should be noted that in real life the central computer should not be disconnected from the PSS programmatically,​ since without OBC the spacecraft will be lost in space. In our construction set, this cannot be done in the normal mode of operation.+The Orbiter Control Computer ​(OCCin the Orbicraft Construction Set holds and executes user’s program for the flight ​of the microsatellite. It is software running ​in the OCC that decides ​which sensors to poll in which order, how their readings are to be interpretedwhich control commands to issue, when to turn on/​off ​the payload (make photo) and which data to transfer to the Earth.
-To download ​the user program ​code onto the on-board central computer, you need to use the [[debug_interface|web interface]].+See the Getting Started section on writing a simple ​program ​for the construction set.
-There is a special software [[libschsat|library]] for working with peripheral devices of the "​satellite"​ via the RS485 bus already installed on the on-board central computer. ​ 
en/pc_subsys.txt · Last modified: 2020/03/25 16:28 (external edit)