User Tools

Site Tools


en:uhf_rx_subsys

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
en:uhf_rx_subsys [2017/12/03 15:49]
writer
en:uhf_rx_subsys [2018/01/23 18:25]
ashley
Line 3: Line 3:
 {{ ru:​uhf_ground.jpg?​direct&​200|}} {{ ru:​uhf_ground.jpg?​direct&​200|}}
  
-The VHF receiver from the construction set simulates the work of the radio receiving ​part of the ground station ​receiving ​telemetric information over the low-speed channel. During the experiments with the "​satellite"​ similar receivers will be mounted directly on the surface of the "​Earth"​ - [[sim_earth|the globe]]. However, ​this VHF receiver for telemetry ​is also included ​in the set to  practice to work with the satellite+The VHF receiver from the construction set simulates the operation ​of the radio receiving ​portion ​of the ground station ​that receives ​telemetric information over the low-speed channel. During the experiments with the "​satellite," similar receivers will be mounted directly on the surface of the "​Earth"​ - [[sim_earth|the globe]]. However, ​for the preliminary work with the "​satellite,"​ the VHF receiver ​necessary ​for telemetry ​can be found in the construction ​set. 
  
 The receiver itself works in conjunction with the MCC software. When transmitting telemetry data with an [[uhf_tx_subsys|on-board radio channel]] and a connected VHF receiver in the ground network, this data will be automatically received by the ground radio channel and displayed in the text field on the left side of MCC software ​ user interface. The receiver itself works in conjunction with the MCC software. When transmitting telemetry data with an [[uhf_tx_subsys|on-board radio channel]] and a connected VHF receiver in the ground network, this data will be automatically received by the ground radio channel and displayed in the text field on the left side of MCC software ​ user interface.
en/uhf_rx_subsys.txt · Last modified: 2018/01/23 18:26 by ashley