User Tools

Site Tools


en:w_subsys

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:w_subsys [2019/09/16 15:37]
golikov
en:w_subsys [2020/03/25 16:28] (current)
Line 1: Line 1:
-**//Angular velocity sensor//** \\  +====== ​Angular velocity sensor ​====== 
-Virtual ​[[power_subsys|consumption]] - 40mA+  
 +Virtual ​power draw: 40 mA
  
 {{ :​ru:​дус.png?​direct&​200| ДУС }} {{ :​ru:​дус.png?​direct&​200| ДУС }}
  
-This sensor ​allows you to measure the spacecraft current ​angular velocities of the device in three axes. Depending on the location ​of the sensor, one of readingsspecifically ​the speed of rotation around the thread, will be critical ​for controlling the spacecraft. The other two readings will help to estimate the oscillations of the spacecraft'​s ​center ​of mass relative to the local vertical ​axis. These readings can also be used in control ​of the spacecraft+The angular velocity ​sensor ​(AVS) enables measurement of momentary ​angular velocities of orbiter rotation around ​three axes. Depending on sensor ​location, one of these indicationsnamely ​the speed of rotation around the thread, will be critically important ​for controlling the orbiter, while the other two can be used to track oscillations of its mass center relative to the local vertical ​thus also providing aids for control. 
-The angular velocity ​determined ​by the sensor ​is 0.00875 ​degrees/second ​per unit [[libschsat|RAW (see the function library, hyro_request_raw)]].+ 
 +<note tip> 
 +**//​Readings of angular velocity ​provided ​by the sensor ​are scaled at 0.00875 ​deg/per RAW unit (see hyro_request_raw in the function library).//** 
 +</​note>​ 
 + 
 +==== Sample C Test Code for the Angular Velocity Sensor ==== 
 + 
 +<file c hyro_test.c>​ 
 +#include "​libschsat.h"​ 
 + 
 +int control(){ 
 + uint16_t num = 1;  // Номер Датчика угловой скорости 
 + int16_t hyro_result[] = {00, 0, 0}; 
 + printf("​Enable angular velocity sensor № %d", num);  
 + hyro_turn_on(num);​ // Включаем ДУС 
 + Sleep (1);​ //​Ждем включения 1 секунду 
 + printf("​\nGet RAW data from angular velocity sensor\n"​);​ 
 +  
 + int i; 
 + for (i = 0; i < 10; i++) { //​Считываем показания 10 раз  
 + hyro_result[0] = hyro_request_raw(num,& hyro_result[1],&​ hyro_result[2],&​ hyro_result[3])
 +  
 + if (!hyro_result[0]
 +
 + printf("​state:​ %d", i); 
 + printf("​ x_raw = %d", hyro_result[1]); 
 + printf("​ y_raw = %d", hyro_result[2]);​ 
 + printf("​ z_raw = %d\n", hyro_result[3]);​ 
 +  
 +
 + else if (hyro_result[0] == 1) 
 +
 + printf("​Fail because of access error, check the connection"​);​ 
 +
 + else if (hyro_result[0] == 2) 
 +
 + printf("​Fail because of interface error, check your code"​);​ 
 +
 + Sleep(1);​ 
 +  
 + }  
 + printf("​\nDisable angular velocity sensor № %d\n", num); 
 + hyro_turn_off(num);​  
 + return 0; 
 +
 + 
 +</​file>​ 
en/w_subsys.txt · Last modified: 2020/03/25 16:28 (external edit)