User Tools

Translations of this page:

Site Tools


en:wifisetup

WiFi connection to the construction set network

WiFi connection is used to download and debug the on-board software from “Earth” developers, as well as for the high-speed transmission of information from the payload during the operation of the “satellite.” When power is supplied to the central on-board computer from the power supply system, the on-board software is automatically downloaded. After everything is downloaded, the central computer creates its own WiFi network named SCHSAT. The name of the network can be changed with the help of the web interface. It is highly recommended to change the name during the final preparation stage for “in flight” experiments with several “satellites” so that several “satellites” can work simultaneously in near-Earth orbit. This will help to avoid conflicts between networks in one room.

To work with the MCC software for the duration of the experiment, a static IP-address of 192.168.42.42 must be assigned to the WiFi adapter of the PC that will be used to work with the “satellite.” This can be done in the network settings of the PC operating system. Only then can you connect to the network SCHSAT.

en/wifisetup.txt · Last modified: 2020/03/25 16:28 (external edit)