User Tools

Site Tools


en:wifisetup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
en:wifisetup [2018/01/17 14:00]
ashley
en:wifisetup [2018/01/17 16:44]
ashley
Line 1: Line 1:
 **WiFi connection to the construction set network** **WiFi connection to the construction set network**
  
-WiFi connection is used by the developer ​to download and debug the on-board software from Earth and for high-speed transmission of information from payload during the exploitation ​of "The Satellite"​. When electricity comes from power supply system ​to central on-board computer the loading of on-board software ​begins. After finishing ​the loading ​central computer creates its own WiFi network named **SCHSAT**. ​Name of network can be changed with help of [[debug_interface|web interface]]. It is highly recommended to change the name at the stage of preparing ​for final experiments ​"​in ​the flight"​ with several "​satellites" ​in case of several "​satellites"​ can work on the one near-Earth orbit. This will help to avoid conflicts between networks in one room.+WiFi connection is used to download and debug the on-board software from "Earth" developers, as well as for the high-speed transmission of information from the payload during the operation ​of the "satellite." ​When power is supplied ​to the central on-board computer ​from the power supply system, ​the on-board software ​is automatically downloaded. After everything is downloaded, ​the central computer creates its own WiFi network named **SCHSAT**. ​The name of the network can be changed with the help of the [[debug_interface|web interface]]. It is highly recommended to change the name during ​the final preparation ​stage for "in flight" ​experiments ​with several "​satellites" ​so that several "​satellites"​ can work simultaneously in near-Earth orbit. This will help to avoid conflicts between networks in one room.
  
 To work with MCC software for the time of experiment IP-address of PC WiFi adapter which will be used to work with the "​Satellite"​ should be changed to **192.168.42.42**. It can be done in network settings of the PC operating system. Only after that, you can connect to the network **SCHSAT**. To work with MCC software for the time of experiment IP-address of PC WiFi adapter which will be used to work with the "​Satellite"​ should be changed to **192.168.42.42**. It can be done in network settings of the PC operating system. Only after that, you can connect to the network **SCHSAT**.
en/wifisetup.txt · Last modified: 2018/01/17 16:50 by ashley