User Tools

Site Tools


en:wifisetup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:wifisetup [2018/01/17 14:00]
ashley
en:wifisetup [2018/01/17 16:50]
ashley
Line 1: Line 1:
 **WiFi connection to the construction set network** **WiFi connection to the construction set network**
  
-WiFi connection is used by the developer ​to download and debug the on-board software from Earth and for high-speed transmission of information from payload during the exploitation ​of "The Satellite"​. When electricity comes from power supply system ​to central on-board computer the loading of on-board software ​begins. After finishing ​the loading ​central computer creates its own WiFi network named **SCHSAT**. ​Name of network can be changed with help of [[debug_interface|web interface]]. It is highly recommended to change the name at the stage of preparing ​for final experiments ​"​in ​the flight"​ with several "​satellites" ​in case of several "​satellites"​ can work on the one near-Earth orbit. This will help to avoid conflicts between networks in one room.+WiFi connection is used to download and debug the on-board software from "Earth" developers, as well as for the high-speed transmission of information from the payload during the operation ​of the "satellite." ​When power is supplied ​to the central on-board computer ​from the power supply system, ​the on-board software ​is automatically downloaded. After everything is downloaded, ​the central computer creates its own WiFi network named **SCHSAT**. ​The name of the network can be changed with the help of the [[debug_interface|web interface]]. It is highly recommended to change the name during ​the final preparation ​stage for "in flight" ​experiments ​with several "​satellites" ​so that several "​satellites"​ can work simultaneously in near-Earth orbit. This will help to avoid conflicts between networks in one room.
  
-To work with MCC software for the time of experiment IP-address of PC WiFi adapter which will be used to work with the "​Satellite"​ should be changed to **192.168.42.42**. ​It can be done in network settings of the PC operating system. Only after that, you can connect to the network **SCHSAT**.+To work with the MCC software for the duration ​of the experiment, a static ​IP-address of **192.168.42.42** ​must be assigned to the WiFi adapter of the PC that will be used to work with the "​satellite." This can be done in the network settings of the PC operating system. Only then can you connect to the network **SCHSAT**.
en/wifisetup.txt · Last modified: 2018/01/17 16:50 by ashley