User Tools

Site Tools


en:wifisetup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:wifisetup [2018/01/17 16:44]
ashley
en:wifisetup [2018/01/17 16:50]
ashley
Line 3: Line 3:
 WiFi connection is used to download and debug the on-board software from "​Earth"​ developers, as well as for the high-speed transmission of information from the payload during the operation of the "​satellite."​ When power is supplied to the central on-board computer from the power supply system, the on-board software is automatically downloaded. After everything is downloaded, the central computer creates its own WiFi network named **SCHSAT**. The name of the network can be changed with the help of the [[debug_interface|web interface]]. It is highly recommended to change the name during the final preparation stage for "in flight"​ experiments with several "​satellites"​ so that several "​satellites"​ can work simultaneously in near-Earth orbit. This will help to avoid conflicts between networks in one room. WiFi connection is used to download and debug the on-board software from "​Earth"​ developers, as well as for the high-speed transmission of information from the payload during the operation of the "​satellite."​ When power is supplied to the central on-board computer from the power supply system, the on-board software is automatically downloaded. After everything is downloaded, the central computer creates its own WiFi network named **SCHSAT**. The name of the network can be changed with the help of the [[debug_interface|web interface]]. It is highly recommended to change the name during the final preparation stage for "in flight"​ experiments with several "​satellites"​ so that several "​satellites"​ can work simultaneously in near-Earth orbit. This will help to avoid conflicts between networks in one room.
  
-To work with MCC software for the time of experiment IP-address of PC WiFi adapter which will be used to work with the "​Satellite"​ should be changed to **192.168.42.42**. ​It can be done in network settings of the PC operating system. Only after that, you can connect to the network **SCHSAT**.+To work with the MCC software for the duration ​of the experiment, a static ​IP-address of **192.168.42.42** ​must be assigned to the WiFi adapter of the PC that will be used to work with the "​satellite." This can be done in the network settings of the PC operating system. Only then can you connect to the network **SCHSAT**.
en/wifisetup.txt · Last modified: 2018/01/17 16:50 by ashley