This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
en:wifisetup [2017/11/15 21:35] writer created |
en:wifisetup [2020/03/25 16:28] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
**WiFi connection to the construction set network** | **WiFi connection to the construction set network** | ||
- | WiFi connection is used by developer for downloading and debugging software from Earth and for high-speed transmission of information from payload during the exploitation of "The Satellite". When electricity comes from power supply system to central on-board computer the loading of on-board software begins. After finishing the loading central computer creates its own WiFi network named **SCHSAT**. Name of network can be changed with help of [[debug_interface|web interface]]. It is highly recommended to change the name at the stage of preparing for final experiments "in the flight" with several "satellites" in case of several "satellites" can work on the one near-Earth orbit. This will help to avoid conflicts between networks in one room. | + | WiFi connection is used to download and debug the on-board software from "Earth" developers, as well as for the high-speed transmission of information from the payload during the operation of the "satellite." When power is supplied to the central on-board computer from the power supply system, the on-board software is automatically downloaded. After everything is downloaded, the central computer creates its own WiFi network named **SCHSAT**. The name of the network can be changed with the help of the [[debug_interface|web interface]]. It is highly recommended to change the name during the final preparation stage for "in flight" experiments with several "satellites" so that several "satellites" can work simultaneously in near-Earth orbit. This will help to avoid conflicts between networks in one room. |
- | To work with MCC software for the time of experiment IP-address of PC WiFi adapter which will be used to work with the "Satellite" should be changed to **192.168.42.42**. It can be done in network settings of the PC operating system. Only after that, you can connect to the network **SCHSAT**. | + | To work with the MCC software for the duration of the experiment, a static IP-address of **192.168.42.42** must be assigned to the WiFi adapter of the PC that will be used to work with the "satellite." This can be done in the network settings of the PC operating system. Only then can you connect to the network **SCHSAT**. |